Composite plate titanium reaction kettle

- Apr 08, 2018 -

Composite plate titanium reaction kettle

TA2 Composite Plate Reactor (Titanium Steel Composite Plate Reactor)


Industrial pure titanium is divided into three grades TA1, TA2 and TA3 according to the impurity content. The gap impurity elements of these three kinds of industrial pure titanium are gradually increased, so the mechanical strength and hardness thereof also increase step by step, but the plasticity and toughness decrease accordingly.


Composite plate titanium reaction kettle.jpg

The industrial pure titanium commonly used in industry is TA2 because of its moderate corrosion resistance and comprehensive mechanical properties. TA3 can be used for high wear and strength requirements. TA1 can be used for better molding performance.

Parallel high pressure reactor, high pressure reactor manufacturer, reactor stirred tank

Titanium is widely used as a material for various chemical reaction vessels and heat exchangers due to its excellent corrosion resistance, but its disadvantage is its high cost. This problem is particularly prominent when it is used as a structural component. An effective solution is to use a titanium steel composite plate. The composite material of titanium and ordinary steel is called a titanium steel composite material, which has both the corrosion resistance of titanium and the strength of ordinary steel plate as a structural material. It is important that the cost is also greatly reduced. Titanium steel composite reactor must be used to cut off the mixer power, hang warning signs, and set up monitoring.

At present, titanium reactors can be mainly divided into pure titanium reactors, composite titanium reactors (titanium steel composite reactors), titanium liner reactors, respectively, for different process environments.