Titanium composite board
Titanium steel composite plate refers to the surface of general ordinary steel plate with corrosion resistance good metal titanium coating, ordinary steel plate corrosion resistance natural increase.
In JIS standard, the board is mainly used for pressure vessels, boilers, nuclear reactors, storage devices, etc., all of which are composite steel with a thickness of more than 8mm, whose specification number is G3603.
Titanium because of its good corrosion resistance and is widely used in all sorts of chemical reaction vessel, heat exchange equipment, but the disadvantage is that the cost is higher, especially as a structural component when using this problem is particularly prominent, effective solution is the use of titanium steel clad plate
The composite material of titanium and ordinary steel is called titanium steel composite, which has both corrosion resistance of titanium and ordinary steel plate as the strength of structure, and the cost is also greatly reduced. Titanium/steel composite plates can be used to process the tube body, tube plate and seal head. If the production of urea synthesis tower, vacuum salt evaporation chamber, polyester reaction kettle and other devices, titanium composite plate is used to make a ratio of pure titanium, significantly reducing the project cost by 30-40%. Starts from the use of titanium/steel composite material the new mileage, alkali production industry in recent years, titanium steel clad plate and added a new use, namely began to apply in the field of Marine civil steel structure corrosion resistant material. This is not only because of its low cost, but also must be made of titanium steel composite plate.
Classification: titanium composite plate mainly includes titanium steel composite plate, titanium zinc composite plate, titanium copper composite plate, titanium aluminum composite plate, titanium nickel composite plate, titanium plastic composite board and so on.